SPECIAL MACHINES
RPA2
Roll Packing Machine
The RPA2 can press and roll Bonnell, open-end and pocket innersprings. The operator loads the machine with individual innersprings via the input table. The innersprings are rolled in brown paper, which is very easy to cut manually.
Technical Data
|
Packing capacity |
up to 12 rolls à 10 spring units / hour |
|
Max. roll diameter |
650 mm |
|
Max. roll width |
2000 mm |
|
Max. unit height |
Pocket spring: 220 mm |
|
Spring unit width |
2000 mm |
|
Packaging material |
Paper |
|
Packaging material holders |
2, manual change over |
|
Mandrel type & diameter |
Plane mandrel, 275 mm Dia. |
|
Paper fixing method to the mandrel |
manual |
|
Roll closing method |
manual by tape |
|
Electrical supply |
3 phase, 400 V, 50 Hz |
|
Air pressure |
6 bar |
|
Total machine weight |
approx. 3'800 kg |
|
L x W x H machine |
6100 x 4900 x 2300 mm |
|
Warranty |
1 year |
Source: RPA2
PSL
Pocket Strand Layering Device
This system is ideally suited for all pocket spring coiling machines made at Spühl and automatically places spring coils in a container, so that they can be easily retrieved by the assembly machine. The interim storage in containers is especially suited to low-cost and highly flexible spring production.
Technical Data
|
Layering dimensions |
2000 x 2000 mm |
|
Coil Height Range |
up to 225 mm |
|
Pocket material type |
any (e.g. cotton, non-woven...) |
|
Layering speed |
up to 16 meters /minute |
|
Options |
Self-standing: machines are supplied with legs |
|
Installed power |
0.8 kW |
|
Electrical net requirement |
400 V AC, 3 Phase, 50 Hz |
|
L x B x H machine with legs |
2826 x 2870 x 3300 mm |
|
Warranty |
1 year |
Source: PSL
FM-1400
Frame Bending Machine
The round or flat material is removed from the reel, straightened and then bent according to the dimensions previously stored in the display. A clip automatically presses together both frame ends. The ready-to-use frame is placed on a tray and is ready for further processing.
Technical Data
|
Round frame material diameter range |
up to 5 mm. Flat wire on request |
|
Clipping material dimensions |
1 mm thick x 30 mm, 1.5 mm thick x 30 mm |
|
Frame material tensile strength range |
up to 1'800N/mm2 |
|
Clip material tensile strength range |
up to 500N/mm2 |
|
Production output |
up to 1400 frames per 8 hour shift, |
|
Average combined dimension |
850 - 900 frames per 8 hour shift |
|
Machine voltage |
to customer specification |
|
Air consumption |
20 litres/minute - 6 bar |
|
Nominal power |
25 kW |
|
Machine dimensions |
approx. 3000 x 2700 x 3200 mm |
|
Swift assembly |
approx. 2000 x 1200 x 1800 mm |
|
Warranty |
1 year |
Source:FM-1400
RO-230-RS
Automatic Roll Pack Opener
For controlled opening of innerspring roll packs.
Technical Data
|
Unit types |
Pocket Spring, Bonnell, LFK |
|
Max. roll pack width |
2170 mm |
|
Max. roll pack diameter |
700 mm |
|
Max. roll pack weight |
300 kg |
|
Warranty |
1 year |
Source: RO-230-RS
ROA-230
Standard Roll Pack Opener
For controlled opening of innerspring roll packs.
Technical Data
|
Max. unit height |
230 mm |
|
Min. unit height |
100 mm |
|
Max. roll pack diameter |
700 mm |
|
Max. roll pack length |
2300 mm |
|
Max. roll pack weight |
200 kg |
|
Packing media |
all, e.g. paper, plastic foil, woven P.P., hessian |
|
Warranty |
1 year |
Source: ROA-230
